NOK-05: Memory card removal/insertion

NOK-05: Memory card removal/insertion while auto-starting an application

Test description:

The removal or insertion of the memory card while application is auto-starting shall not cause problems.

Steps to conduct the test:

Precondition: Application is installed to memory card.

Test case A:

  1. Reboot the device after the application has been installed.

  2. Insert memory card to the device before typing in the PIN code.

Test case B:

  1. Reboot the device after the application has been installed.

  2. Insert memory card to the device right after typing in the PIN code.

Test case C:

  1. Reboot the device after the application has been installed.

  2. Remove memory card from the device before typing in the PIN code.

Test case D:

  1. Reboot the device after the application has been installed.

  2. Remove memory card from the device right after typing in the PIN code.

Test case E:

  1. Reboot the device after the application has been installed.

  2. Remove memory card.

  3. Reboot the device again.

Repeat the same test cases when the application is installed to C: (if supported by the application).

Expected test result:

In all test cases check that the device switches on without problems and that removing/inserting the memory card doesn’t cause anything unexpected (device to reboot itself, jam, etc.).

Notes:

This test case applies only if the application supports auto-start.

Exceptions:

Pass:____ Fail:____ Pass with exception: ____
© Nokia 2007.